Skip to main content

#DAY 2 USE OF FUNCTION KEYS

AutoCAD Tutorial 
# Day 2 
Use of Function keys 
Use Of Function Keys in AutoCAD 2015 

KEYS
DESCRIPTION
F1
Help window
F2
Text window ON/OFF
F3
OSNAP(Object snap)
F4
3D Osnap ( 3D object snap On/OFF)
F5
Isoplane Top/Right /Left
F6
Dynamic UCS On/Off
F7
Grid on/off
F8
Ortho on/off
F9
Snap
(Point to Point Movement )
F10
Polar Line
F11
Object snap Tracking
F12
Dynamic input (Tap –Angle Measuring )

Function key F1, Help window
           F1 key, helps to access your  doubts in AutoCAD through online and you can clarify  your doubs through online access.


Function key F2,Text window ON/OFF
           F2 Key , helps to   display a expanded command history in the command window, by this dialog box we can check what command we used and to check whether all the commands are properly utilized .

Function key F3,OSNAP(Object snap)
         Turns object snap on/off, by this  F3 key, while placing a object (eg. line, CADD Blocks ..etc) Corners, Mid point are shown.

Function key F4,3D Osnap ( 3D object snap On/OFF)
                       Similar to F3 command , But it works in 3D model,

  Function key F5,Isoplane Top/Right /Left
               Cycle through 2D isoplane settings 
Function key F6, Dynamic UCS On/Off
Turns automatic UCS alignment with planar surface On/Off

 Function key F7 Grid on/off
       Grid On/Off helps to align a text or any object in a vertical and horizontal  plane.

Function key F8,Ortho on/off
looks cursor movement in Vertical and  Horizontal and helps the plan to rotate in a horizontal and vertical plan ( more useful while projecting floor plan)

Function key F9,Snap(Point to Point Movement )
it to move the object in a point to point direction 
Function key F10,Polar Line
 Guides cursor movement to specified angles. Shows the direction of angle.

 Function key F11,Object snap Tracking
it helps to track a object where it is located by location 

 Function key F12,Dynamic input (Tap –Angle Measuring )
Displays distance and angles near the cursor and accepts input as you use tab between fields.


                                                         Thanks and Regards
                                                             Er.karthiga.SFor Quires:  ssbuildersandplanner@gmail.com 




         

Comments

Post a Comment

Popular posts from this blog

# Day 3 Setting Units & Limits

AutoCAD Tutorial #Day 3 Setting Units and Limits Units: Short cut:  Type a Command : ‘UN’ then Enter Dialog box ( open) In this dialog box set decimal, engineering, architecture , fractional and scientific as your wish Type Precision Decimal 0.00 Architectural 0’0.0” Engineering 0’0” Fractional 0 1/16 Scientific 0.0000E+01  For making floor plan set “Engineering” and 0’0 In units to scale inserted content set “ inches” No need to change angle “decimal angle and 0 degree” Limits: Short cut :  Type a command : “Limits” then Enter Enter the coordinates for a point at lower left corner of the grid limits . Enter the coordinates of the point at the upper – right corner of the grid limits . At the command prompt, enter grid display and enter a value of "0" Note : to restore the grid display to the enter XY plane of USC, set grid display t...
Post a Comment
Read more

#DAY 1, INTRODUCTION

AutoCAD Tutorial  #Day 1 INTRODUCTION  Welcome to AutoCAD tutorial ,                       Let us discuss about the AutoCAD Software, By using AutoCAD Software helps to make a project in 2D and 3D models. INTRODUCTION                                 AutoCAD is a Commercial Computer-Aided Design (CAD) and drafting software application.it was first released in December 1982,  as a d esktop app running on  microcomputers   with internal  graphic control.   Before AutoCAD was introduced, most commercial CAD programs ran on  mainframe computers   or  minicomputers , with each CAD operator (user) working at a separate  graphic terminals.  Since 2010, AutoCAD was released as a  mobile   and  web app  as well, marketed as AutoCAD 360. AutoCAD is used in the industr...
Post a Comment
Read more