Skip to main content

#Day 4 Setting out Drawing Sheet


AutoCAD Tutorial 

#Day 4 
Setting out Drawing Sheet  

DRAWING  SHEET SIZE
                             The bureau of Indian standard IS:10711 has recommended three series of size of drawing sheet
                               The size are selected from the international standard, ISO :5457, known as ISO – A series . while selecting drawing sheet three choice can be followed as First Choice , Second Choice , Third Choice  
Size of ISO –A series drawings sheets
First choice
Designation
Trimmed size(mm)
A0
841 X 1189
A1
594  X 841
A2
420 X 594
A3
297 X 420
A4
210 X 297
Size of special elongated sheet
Second choice
A3 X 3
420 X 891
A3 X 4
420 X 1189
A4 X 3
297 X 630
A4 X 4
297 X 841
A4 X 5
297 X 1051
Size of Special elongated sheets
Third choice
A0 X 2*
1189 X 1682
A0 X 3
1189 X 2523**
A1 X 3
841 X 1783
A1 X 4
841 X 2378**
A2 X 3
594 X 1261
A2 X 4
594 X 1682
A2 X 5
594 X 2102
A3 X 5
420 X 1486
A3 X 6
420 X 1783
A3 X 7
420 X 2080
A4 X 6
297 X 1261
A4 X 7
297 X 1471
A4 X 8
297 X 1682
A4 X 9
297 X 1892
                 The size is equal to 2A0 of ISO – A series
                             For practical reason , the use of these sixes is not advisable.

Thanks & Regards 
Er.Karthiga.S B.E,M.E.,

Labels:

Comments

Post a Comment

Popular posts from this blog

# Day 3 Setting Units & Limits

AutoCAD Tutorial #Day 3 Setting Units and Limits Units: Short cut:  Type a Command : ‘UN’ then Enter Dialog box ( open) In this dialog box set decimal, engineering, architecture , fractional and scientific as your wish Type Precision Decimal 0.00 Architectural 0’0.0” Engineering 0’0” Fractional 0 1/16 Scientific 0.0000E+01  For making floor plan set “Engineering” and 0’0 In units to scale inserted content set “ inches” No need to change angle “decimal angle and 0 degree” Limits: Short cut :  Type a command : “Limits” then Enter Enter the coordinates for a point at lower left corner of the grid limits . Enter the coordinates of the point at the upper – right corner of the grid limits . At the command prompt, enter grid display and enter a value of "0" Note : to restore the grid display to the enter XY plane of USC, set grid display t...
Post a Comment
Read more

#Day 5 About ZOOM Command

AutoCAD Tutorial  #Day 5  About ZOOM Command  Zoom:                Zoom to display an area specified by a rectangular window. With the cursor, you can define an area of the model to fill the entire window. Zoom to display one or more selected objects as large as possible and in the center of the view. In a perspective view, zoom display the 3DZOOM Prompts. All :                Zoom to display all visin]ble objects and visual aids.  Adjust the magnification of the drawing area to accommodate the extent to all visible objects in the drawing, pr visual aids such as the grid limits (the limits command), whichever is larger.  Because it always   regenerates the drawing.   You cannot ZOOM ALL transparently. Center:               Zoom to display a view defined by a center point and a magnification value or a height. A s...
Post a Comment
Read more

#DAY 1, INTRODUCTION

AutoCAD Tutorial  #Day 1 INTRODUCTION  Welcome to AutoCAD tutorial ,                       Let us discuss about the AutoCAD Software, By using AutoCAD Software helps to make a project in 2D and 3D models. INTRODUCTION                                 AutoCAD is a Commercial Computer-Aided Design (CAD) and drafting software application.it was first released in December 1982,  as a d esktop app running on  microcomputers   with internal  graphic control.   Before AutoCAD was introduced, most commercial CAD programs ran on  mainframe computers   or  minicomputers , with each CAD operator (user) working at a separate  graphic terminals.  Since 2010, AutoCAD was released as a  mobile   and  web app  as well, marketed as AutoCAD 360. AutoCAD is used in the industr...
Post a Comment
Read more